Försäljning!
Gödseltork
Gödseltork - Bild 2
Gödseltork - Bild 3
Gödseltork - Bild 4

Gödseltork

Prisklass: $5,985.00 genom $42,750.00

5% Av

Ansökan

Brytning, kemisk industri, byggnadsmaterial, gödningsanläggningar, etc.

Kapacitet

1-18 t/h

Huvudmakt

5.5-45 kw

Temp of Inlet

≥300 ℃

Why dry mineral fertilizer?

  • 【Reduce Moisture Content】Through drying treatment, you can effectively reduce the moisture content in mineral fertilizers to a standard suitable for storage and transportation. Således, it effectively prevents problems such as agglomeration and mildew caused by excessive moisture.

  • 【Improve Fertilizer Fluidity】Proper drying procedure can improve the physical properties of mineral fertilizers, such as increasing its fluidity, making it easier to package, transport and mechanically apply.

  • 【Ensure Fertilizer Quality】Drying can reduce the loss of nutrients caused by chemical reactions such as hydrolysis and oxidation during storage and use of fertilizers, thereby ensuring the effectiveness of mineral fertilizers.

Torkmaskin på marknaden

Torkmaskin på marknaden

Working Principle of Shunxin Fertilizer Drying Equipment

Gödseltork är en sorts utrustning som används speciellt för att torka fukten i gödselmedel. Dessutom, det är allmänt användbart i produktionsprocessen av organiskt gödningsmedel, sammansatt gödsel och mineralgödsel. Dessutom, gödseltorken använder varm luft för att avdunsta och ta bort fukten i gödseln, därigenom minskar fukthalten i gödselmedlet, förbättra gödselmedlets lagringsstabilitet, och gör det lättare att transportera och använda. Sedan, följande är arbetsprincipen för gödningstork:

Design of Rotary Drum Dryer

Design of Rotary Drum Dryer

Fertilizer dryers often have a heating system, such as a combustion furnace, to generate hot air. And, heating systems can use a variety of fuels such as natural gas, kol, and biomass fuel to heat the air.

Wet fertilizer is sent into the dryer through a conveyor belt or other conveying equipment. Samtidigt, the heated hot air is sent into the inside of the dryer. I allmänhet, hot air is input from one end of the dryer and conducts heat exchange with the materials.

Typiskt, Fertilizer dryers usually take the form of a rotary drum. In the cylinder, the materials are thrown up and spread out. Således, it increases the contact area with hot air and promotes the heat exchange process. The cylinder is usually placed slightly tilted, and the material moves from the high end to the low end of the cylinder under the action of gravity. During the process, the material fully exchanges heat with the hot air and the moisture is evaporated.

The hot air that takes away the moisture from the dryer, and the dust and fine particles are of reduction through the dust removal system to ensure that the emissions meet the standards. Sedan, the dried fertilizer is discharged from the outlet of the dryer and sent to the next process or storage area through conveying equipment.

Through the above process, the fertilizer dryer can effectively reduce the moisture content in the fertilizer, improve its quality and facilitate storage and transportation. Dessutom, the design and operating parameters of the fertilizer dryer (such as drying temperature, cylinder speed, hot air flow, etc.) need to be adjusted according to the specific fertilizer type and required drying degree to achieve the best drying effect.

What are the necessary supporting equipment for a drying machine?

The efficiency and performance of a dryer depend largely on its necessary supporting equipment, especially the heating source. When using a dryer to process materials, natural gas combustion furnaces and hot air furnaces are two common heating devices that provide the necessary heat energy for the drying process.

Heat Supply Devices for Sale

  • 【Naturgasbrännare】 The natural gas burner is a heating device that uses natural gas as fuel. Dessutom, it is mainly of use for fertilizer drying in the fertilizer production process, and can also be as a heat source for drying other raw materials. Sedan, natural gas burners widely occur in fertilizer production due to their high efficiency, clean combustion and easy operation.

    • Working principle: It generate heat by burning natural gas. And, the combustion chamber mixes natural gas with air and ignites it, producing a large amount of heat energy. Också, the heat exchange device transfers this heat energy to the flowing air or other media, and the hot air generated subsequently dries the materials in the dryer.

  • 【Hot Blast Furnace】Hot blast furnaces are widely of use in the production of fertilizers. Dessutom, they can use natural gas, kol, biomass, electricity and other energy sources as fuel. Yushunxin hot blast furnace is lined with mangan steel plates on the outside and refractory bricks on the inside, making it easy for users to hoist, install and use at any time. Vad mer är, we can customize different models according to customer requirements.

    • Working principle: A hot blast stove heats air or other gases by burning fuel (such as coal, oil, natural gas, etc.) to generate hot blast. Också, hot air stove contains a combustion chamber where it burns fuel to generate heat. Sedan, it transfers this heat to the air through a heat exchanger. And finally, it delivers the heated air to the dryer to dry the material.

How to improve fertilizer quality in the subsequent process after drying?

The efficiency and performance of a dryer depend largely on its necessary supporting equipment, especially the heating source. When using a dryer to process materials, natural gas combustion furnaces and hot air furnaces are two common heating devices that provide the necessary heat energy for the drying process.

Annan extrautrustning

Since the temperature of the dried fertilizer is high, it needs to be of cooling down by a cooler to prevent the fertilizer from getting wet and clumping. Dessutom, cooling also helps improve fertilizer storage stability. Coolers usually use a rotary structure and work similarly to dryers, but cold air is blown in here.

The drying and cooling fertilizer may have particles of different sizes, and screening can be of use to separate the fertilizer into different grades and remove particles that are too small and too large. For this step, you can use screening equipment such as vibrating screens or trommel screens.

For certain types of fertilizers (such as controlled-release fertilizers), a coating machine can be of use to add a shell to the fertilizer granules after cooling and screening. This shell can improve the nutrient release efficiency of fertilizers, reduce nutrient loss, förbättra gödningseffektiviteten. And, it improves the physical properties of fertilizer particles, such as moisture resistance and pressure resistance.

According to market demand, fertilizers are of package into bags or bags of different specifications. High-quality packaging can not only better protect fertilizers and prevent moisture, agglomeration and other problems, but also help improve the market competitiveness of products. Således, an automatic packaging machine can effectively improve packaging efficiency and accuracy.

Slutligen, the separated gas will enter the dust collector through the pipeline for purification treatment. Sedan, the purified gas will be discharged into the atmosphere to meet environmental protection requirements.

What Are The Features of Yushunxin Rotary Drum Dryer?

Torkmaskin på marknaden

Torkmaskin på marknaden

  • 【High drying efficiency】The rotary dryer adopts a unique rotation design, which allows the material to be of heat evenly during the drying process, effectively improving the drying efficiency. Samtidigt, its advanced hot air circulation system can make full use of thermal energy, reduce heat loss, and further improve drying efficiency.

  • 【Large processing capacity】The rotary drum dryer is suitable for processing large amounts of materials and is suitable for large-scale fertilizer drying production needs. Due to its continuous operation characteristics, efficient material handling can be achieved, and its production capacity can reach 1-18t/h.

  • 【Stark anpassningsförmåga】The rotary dryer is suitable for drying a variety of materials, including granular, powdery, lumpy and other different forms of materials. Such as slag, coal slime, flygaska, sand and gravel, feces, etc., and has a wide range of adaptability.

  • 【Easy to operate】The rotary dryer adopts an automated control system, which is easy to operate and easy to master. The staff only needs to set the drying parameters, such as temperature, fuktighet, etc., and the machine can run automatically, which greatly reduces the difficulty of operation and improves work efficiency.

  • 【Energy saving and environmental protection】The more direct or indirect heating methods are used, with high thermal efficiency and low energy consumption. Dessutom, through the exhaust gas treatment system, environmental pollution can be greatly reduced.

Fertilizer dryers play an indispensable role in mineral fertilizer production. During the production process of mineral fertilizers (such as nitrogen fertilizers, phosphate fertilizers, potassium fertilizers, etc.), the water content is often too high, which not only affects the storage and transportation of fertilizers, but may also affect its application effect. Därför, proper drying is an important step to ensure fertilizer quality and efficiency.

Innehåll

Hett försäljning

Fall

Nya nyheter